PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M24135/1-32
M24135/1-32 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The M24135/1-32 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-288-9865, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M24135/1-32
NSN: 4720-00-288-9865
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM24135/1-32
NSN4720-00-288-9865
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: M24135/1-32 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BURST TEST PRESSURE: 4500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
OUTSIDE DIAMETER: 2.750 INCHES NOMINAL IN
•
MINIMUM INSIDE BENDING RADIUS: 25.000 INCHES IN
•
SPECIFICATION/STANDARD DATA: 81349-MIL-H-24135 GOVERNMENT SPECIFICATION
•
OUTER COVERING ENVIRONMENTAL PROTECTION: FUEL RESISTANT AND OIL RESISTANT AND WATER RESISTANT AND WEATHERPROOF
TECHNICAL CHARACTERISTICS (FLIS)
BURST TEST PRESSURE4500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
OUTSIDE DIAMETER2.750 INCHES NOMINAL IN
END ITEM IDENTIFICATIONFORRESTAL CLASS CV
MINIMUM INSIDE BENDING RADIUS25.000 INCHES IN
SPECIFICATION/STANDARD DATA81349-MIL-H-24135 GOVERNMENT SPECIFICATION
OUTER COVERING ENVIRONMENTAL PROTECTIONFUEL RESISTANT AND OIL RESISTANT AND WATER RESISTANT AND WEATHERPROOF
SPECIAL FEATURESWEAPON SYSTEM ESSENTIAL
INSIDE SURFACE CONDITIONSMOOTH
OPERATING PRESSURE1125.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
1509-6Interchangeable
interchangeable cross-reference
interchangeable
M24135/1-06Interchangeable
interchangeable cross-reference
interchangeable
MIL-H-24135-6CLInterchangeable
interchangeable cross-reference
interchangeable
FC163-10Interchangeable
interchangeable cross-reference
interchangeable
FC163-1509-10Interchangeable
interchangeable cross-reference
interchangeable
KT-3070-3 ITEMInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M24135/1-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M24135/1-32?
M24135/1-32 is a M24135/1-32.
What parts can replace M24135/1-32?
There are 30 known substitutes for M24135/1-32: 1509-6, M24135/1-06, MIL-H-24135-6CL and 27 more. Substitute compatibility should be verified for your specific system.
Is M24135/1-32 still available?
M24135/1-32 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M24135/1-32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026