Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.312 INCHES NOMINAL IN, length: 0.280 INCHES NOMINAL IN, material: COPPER ALLOY OVERALL, hole_diameter: 0.071 INCHES NOMINAL IN, overall_height: 0.340 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-177-4214, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
M24066-3-001
NSN:5340-00-177-4214 FSC:5340 CAGE:81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
width
0.312 INCHES NOMINAL IN
length
0.280 INCHES NOMINAL IN
material
COPPER ALLOY OVERALL
hole_diameter
0.071 INCHES NOMINAL IN
overall_height
0.340 INCHES NOMINAL IN
mounting_method
UNTHREADED HOLE(S)
material_thickness
0.012 INCHES NOMINAL IN
loop/holding_dimension
0.260 INCHES NOMINAL IN
distance_from_loop_center_to_end
0.190 INCHES NOMINAL IN
material_document_and_classification
QQ-C-533,ALLOY 170,TEMPER 1/4H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN
5340-00-177-4214
COMPONENT DIAGRAM
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO END: 0.190 INCHES NOMINAL IN
•
LENGTH: 0.280 INCHES NOMINAL IN
•
WIDTH: 0.312 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL THICKNESS: 0.012 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533,ALLOY 170,TEMPER 1/4H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: COPPER ALLOY OVERALL
•
LOOP/HOLDING DIMENSION: 0.260 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO END
0.190 INCHES NOMINAL IN
LENGTH
0.280 INCHES NOMINAL IN
WIDTH
0.312 INCHES NOMINAL IN
MOUNTING METHOD
UNTHREADED HOLE(S)
MATERIAL THICKNESS
0.012 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-C-533,ALLOY 170,TEMPER 1/4H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M24066-3-001?
M24066-3-001 is a CLIP,SPRING TENSION.
What parts can replace M24066-3-001?
There are 17 known substitutes for M24066-3-001: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M24066-3-001?
M24066-3-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-177-4214. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.