Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.340 INCHES NOMINAL IN, length: 0.750 INCHES NOMINAL IN, material: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL, hole_diameter: 0.103 INCHES NOMINAL IN, overall_height: 0.380 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-031-0489, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MIL-C-24066
NSN:5340-00-031-0489 FSC:5340 CAGE:81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
width
0.340 INCHES NOMINAL IN
length
0.750 INCHES NOMINAL IN
material
COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
hole_diameter
0.103 INCHES NOMINAL IN
hole_quantity
2
overall_height
0.380 INCHES NOMINAL IN
mounting_method
UNTHREADED HOLE(S)
style_designator
STANDOFF
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.016 INCHES NOMINAL IN
loop/holding_dimension
0.312 INCHES NOMINAL IN
distance_from_loop_center_to_end
0.196 INCHES NOMINAL IN
NSN
5340-00-031-0489
COMPONENT DIAGRAM
KEY FEATURES
•
WIDTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
LOOP/HOLDING DIMENSION: 0.225 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
DISTANCE FROM LOOP CENTER TO END: 0.152 INCHES MINIMUM IN
•
LENGTH: 0.240 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH
0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
LOOP/HOLDING DIMENSION
0.225 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
OVERALL HEIGHT
0.300 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MOUNTING METHOD
UNTHREADED HOLE(S)
DISTANCE FROM LOOP CENTER TO END
0.152 INCHES MINIMUM IN
LENGTH
0.240 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
SURFACE TREATMENT
CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-C-24066?
MIL-C-24066 is a CLIP,SPRING TENSION.
What parts can replace MIL-C-24066?
There are 9 known substitutes for MIL-C-24066: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 6 more. Substitute compatibility should be verified for your specific system.
Is MIL-C-24066 still available?
MIL-C-24066 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.