PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M24066/3-106
M24066/3-106 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M24066/3-106 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-089-7434, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M24066/3-106
NSN: 5340-01-089-7434
FSC: 5340
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
Part NumberM24066/3-106
NSN5340-01-089-7434
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M24066/3-106 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM OR CADMIUM AND CHROMATE OR CADMIUM AND PHOSPHATE OVERALL
•
LOOP/HOLDING DIMENSION: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.128 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LENGTH: 0.570 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.366 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM OR CADMIUM AND CHROMATE OR CADMIUM AND PHOSPHATE OVERALL
LOOP/HOLDING DIMENSION0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
HOLE DIAMETER0.128 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
LENGTH0.570 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.366 INCHES NOMINAL IN
OVERALL HEIGHT0.670 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
MATERIAL THICKNESS0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
WIDTH0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
MOUNTING METHODUNTHREADED HOLE(S)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
M24066-3-003Interchangeable
interchangeable cross-reference
interchangeable
M24066/3-003Interchangeable
interchangeable cross-reference
interchangeable
946455-503Interchangeable
interchangeable cross-reference
interchangeable
MILC24066Interchangeable
interchangeable cross-reference
interchangeable
5340PL1524734Interchangeable
interchangeable cross-reference
interchangeable
NASM24066/3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M24066/3-106?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M24066/3-106?
M24066/3-106 is a M24066/3-106.
What parts can replace M24066/3-106?
There are 19 known substitutes for M24066/3-106: M24066-3-003, M24066/3-003, 946455-503 and 16 more. Substitute compatibility should be verified for your specific system.
Is M24066/3-106 still available?
M24066/3-106 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M24066/3-106

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026