Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, length: 0.570 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN, material: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL, hole_diameter: 0.125 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN, overall_height: 0.670 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-508-3273, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
M24066/3-006
NSN:5340-00-508-3273 FSC:5340 CAGE:81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
width
0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
length
0.570 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
material
COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
hole_diameter
0.125 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
overall_height
0.670 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
loop/holding_dimension
0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
distance_from_loop_center_to_end
0.361 INCHES MINIMUM AND 0.371 INCHES MAXIMUM IN
material_document_and_classification
QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classification
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN
5340-00-508-3273
COMPONENT DIAGRAM
KEY FEATURES
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL THICKNESS: 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.361 INCHES MINIMUM AND 0.371 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.125 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING METHOD
UNTHREADED HOLE(S)
MATERIAL THICKNESS
0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
OVERALL HEIGHT
0.670 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END
0.361 INCHES MINIMUM AND 0.371 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M24066/3-006?
M24066/3-006 is a CLIP,SPRING TENSION.
What parts can replace M24066/3-006?
There are 20 known substitutes for M24066/3-006: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M24066/3-006?
M24066/3-006 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-508-3273. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.