PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M24066/3-004
M24066/3-004 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M24066/3-004 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-102-7671, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M24066/3-004
NSN: 5340-01-102-7671
FSC: 5340
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
Part NumberM24066/3-004
NSN5340-01-102-7671
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M24066/3-004 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO END: 0.227 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: COPPER ALLOY 172 OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL THICKNESS: 0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO END0.227 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALCOPPER ALLOY 172 OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
OVERALL HEIGHT0.430 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN
MATERIAL THICKNESS0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
LOOP/HOLDING DIMENSION0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
WIDTH0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
M24066-3-003Interchangeable
interchangeable cross-reference
interchangeable
M24066/3-003Interchangeable
interchangeable cross-reference
interchangeable
946455-503Interchangeable
interchangeable cross-reference
interchangeable
MILC24066Interchangeable
interchangeable cross-reference
interchangeable
5340PL1524734Interchangeable
interchangeable cross-reference
interchangeable
NASM24066/3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M24066/3-004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M24066/3-004?
M24066/3-004 is a M24066/3-004.
What parts can replace M24066/3-004?
There are 17 known substitutes for M24066/3-004: M24066-3-003, M24066/3-003, 946455-503 and 14 more. Substitute compatibility should be verified for your specific system.
Is M24066/3-004 still available?
M24066/3-004 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M24066/3-004

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026