Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, length: 0.260 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN, material: STEEL OVERALL, hole_diameter: 0.093 INCHES NOMINAL IN, overall_height: 0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-063-5983, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
M24066/2-317
NSN:5340-00-063-5983 FSC:5340 CAGE:80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
width
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
length
0.260 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
material
STEEL OVERALL
hole_diameter
0.093 INCHES NOMINAL IN
overall_height
0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
loop/holding_dimension
0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
distance_from_loop_center_to_end
0.160 INCHES MINIMUM IN
material_document_and_classification
ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classification
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN
5340-00-063-5983
COMPONENT DIAGRAM
KEY FEATURES
•
HOLE DIAMETER: 0.093 INCHES NOMINAL IN
•
WIDTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.160 INCHES MINIMUM IN
•
LOOP/HOLDING DIMENSION: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
MATERIAL THICKNESS: 0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER
0.093 INCHES NOMINAL IN
WIDTH
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END
0.160 INCHES MINIMUM IN
LOOP/HOLDING DIMENSION
0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
MATERIAL
STEEL OVERALL
MATERIAL THICKNESS
0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M24066/2-317?
M24066/2-317 is a CLIP,SPRING TENSION.
What parts can replace M24066/2-317?
There are 19 known substitutes for M24066/2-317: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 16 more. Substitute compatibility should be verified for your specific system.
Is M24066/2-317 still available?
M24066/2-317 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.