PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M24066/2-223
M24066/2-223 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M24066/2-223 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-144-6721, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M24066/2-223
NSN: 5340-00-144-6721
FSC: 5340
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
Part NumberM24066/2-223
NSN5340-00-144-6721
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M24066/2-223 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP/HOLDING DIMENSION: 0.390 INCHES MINIMUM IN
•
HOLE DIAMETER: 0.1000 INCHES MINIMUM AND 0.1060 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.250 INCHES NOMINAL IN
•
HOLE QUANTITY: 2
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
WIDTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
LOOP/HOLDING DIMENSION0.390 INCHES MINIMUM IN
HOLE DIAMETER0.1000 INCHES MINIMUM AND 0.1060 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.250 INCHES NOMINAL IN
HOLE QUANTITY2
MOUNTING METHODUNTHREADED HOLE(S)
WIDTH0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
MATERIALCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
STYLE DESIGNATORSTANDOFF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
M24066/2-030Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2-230Upgraded Successor
successor cross-reference
successor
M24066/2-230Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2Upgraded Successor
successor cross-reference
successor
MILC24066-2Upgraded Successor
successor cross-reference
successor
M24066/2-011Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M24066/2-223?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M24066/2-223?
M24066/2-223 is a M24066/2-223.
What parts can replace M24066/2-223?
There are 24 known substitutes for M24066/2-223: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 21 more. Substitute compatibility should be verified for your specific system.
Is M24066/2-223 still available?
M24066/2-223 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M24066/2-223

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026