The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN, length: 1.030 INCHES MINIMUM AND 1.070 INCHES MAXIMUM IN, material: STEEL OVERALL, hole_diameter: 0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN, overall_height: 1.190 INCHES MINIMUM AND 1.230 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.
Government catalog under NSN 5340-01-013-6760, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
M24066/2-144
NSN:5340-01-013-6760 FSC:5340 — Hardware, Commercial CAGE:80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
width
1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN
length
1.030 INCHES MINIMUM AND 1.070 INCHES MAXIMUM IN
material
STEEL OVERALL
hole_diameter
0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN
overall_height
1.190 INCHES MINIMUM AND 1.230 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
special_test_features
SPECIAL QUALITY CONTROL TESTING
loop/holding_dimension
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
departure_from_cited_designator
AS MOD BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
distance_from_loop_center_to_end
0.620 INCHES NOMINAL IN
NSN
5340-01-013-6760
COMPONENT DIAGRAM
KEY FEATURES
•
LENGTH: 1.030 INCHES MINIMUM AND 1.070 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT
1.190 INCHES MINIMUM AND 1.230 INCHES MAXIMUM IN
LENGTH
1.030 INCHES MINIMUM AND 1.070 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SPECIAL TEST FEATURES
SPECIAL QUALITY CONTROL TESTING
MOUNTING METHOD
UNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATION
ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
DEPARTURE FROM CITED DESIGNATOR
AS MOD BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M24066/2-144?
M24066/2-144 is a CLIP,SPRING TENSION.
What parts can replace M24066/2-144?
There are 3 known substitutes for M24066/2-144: NASM24066/2, MIL-C-24066/2, 6020-84A. Substitute compatibility should be verified for your specific system.
What is the NSN for M24066/2-144?
M24066/2-144 is cataloged in the U.S. Government catalog under NSN 5340-01-013-6760. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.