PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M24066/2-110
M24066/2-110 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M24066/2-110 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-051-5473, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M24066/2-110
NSN: 5340-00-051-5473
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
Part NumberM24066/2-110
NSN5340-00-051-5473
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M24066/2-110 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.093 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN
•
LENGTH: 0.530 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.500 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL: STEEL OVERALL
•
DISTANCE FROM LOOP CENTER TO END: 0.300 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.093 INCHES NOMINAL IN
MATERIAL THICKNESS0.016 INCHES NOMINAL IN
OVERALL HEIGHT0.600 INCHES NOMINAL IN
LENGTH0.530 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.500 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
MATERIALSTEEL OVERALL
DISTANCE FROM LOOP CENTER TO END0.300 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
M24066/2-030Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2-230Upgraded Successor
successor cross-reference
successor
M24066/2-230Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2Upgraded Successor
successor cross-reference
successor
MILC24066-2Upgraded Successor
successor cross-reference
successor
M24066/2-011Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M24066/2-110?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M24066/2-110?
M24066/2-110 is a M24066/2-110.
What parts can replace M24066/2-110?
There are 22 known substitutes for M24066/2-110: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M24066/2-110?
M24066/2-110 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-051-5473. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M24066/2-110

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026