PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M14130
M14130 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.062 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.344 INCHES NOMINAL IN, bolt_circle_diameter: 2.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-254-5630, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M14130
NSN: 5330-00-254-5630
FSC: 5330
CAGE: 16004 — DAVEY COMPRESSOR CO DIV OF KECO INDUSTRIES INC (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.062 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter1.344 INCHES NOMINAL IN
bolt_hole_quantity2
bolt_circle_diameter2.375 INCHES NOMINAL IN
outside_corner_radius0.344 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center0.938 INCHES NOMINAL IN
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-254-5630
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M14130 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
HOLE DIAMETER: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE DIAMETER: 1.344 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 2.375 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 0.938 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH3.062 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE DIAMETER1.344 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER2.375 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER0.938 INCHES NOMINAL IN
MATERIALPAPER AND GLUE AND GLYCERIN OVERALL
BOLT HOLE QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
24127Interchangeable
interchangeable cross-reference
interchangeable
14130Interchangeable
interchangeable cross-reference
interchangeable
32-268363-427Interchangeable
interchangeable cross-reference
interchangeable
BPF101628-27Interchangeable
interchangeable cross-reference
interchangeable
3T9M397-4-3Interchangeable
interchangeable cross-reference
interchangeable
CL40BP3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M14130?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M14130?
M14130 is a GASKET.
What parts can replace M14130?
There are 19 known substitutes for M14130: 24127, 14130, 32-268363-427 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M14130?
M14130 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-254-5630. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M14130

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026