PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 24127
24127 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

HEATING ELEMENT,ELECTRICAL,NONIM. Key specifications include phase: THREE, shape: ROUND, material: STEEL OVERALL, duty_cycle: CONTINUOUS, point_type: SPLIT, point_angle: 118.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-021-3963, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24127
NSN: 5330-00-021-3963
FSC: 5330
CAGE: 53059 — SPIRAX SARCO INC DBA SPIRAX SARCO (USA)
SPECIFICATIONS
phaseTHREE
shapeROUND
materialSTEEL OVERALL
duty_cycleCONTINUOUS
point_typeSPLIT
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
ambient_temp50.0 CELSIUS DEGC
control_typeLOCAL
flute_length3.938 INCHES NOMINAL IN
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.266 INCHES NOMINAL IN
NSN5330-00-021-3963
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 24127 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE CORNER INVERTED RADIUS: 0.344 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
SIDE RADIUS FROM GASKET CENTER: 0.938 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.344 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
MATERIAL: PAPER AND GLUE AND GLYCERIN OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE CORNER INVERTED RADIUS0.344 INCHES NOMINAL IN
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SIDE RADIUS FROM GASKET CENTER0.938 INCHES NOMINAL IN
OVERALL WIDTH3.062 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.344 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
MATERIALPAPER AND GLUE AND GLYCERIN OVERALL
SPECIAL FEATURESBOLT HOLES 2.375 IN. C TO C IN
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
24127Interchangeable
interchangeable cross-reference
interchangeable
3T9M397-4-3Interchangeable
interchangeable cross-reference
interchangeable
CL40BP3Interchangeable
interchangeable cross-reference
interchangeable
14130Interchangeable
interchangeable cross-reference
interchangeable
M14130Interchangeable
interchangeable cross-reference
interchangeable
2111 27/64Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 24127?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24127?
24127 is a HEATING ELEMENT,ELECTRICAL,NONIM.
What parts can replace 24127?
There are 9 known substitutes for 24127: 24127, 3T9M397-4-3, CL40BP3 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 24127?
24127 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-021-3963. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24127

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026