PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M09
M09 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC COVER, wall_thickness: 0.125 INCHES NOMINAL IN, working_length: 6.125 INCHES NOMINAL IN, inside_diameter: 1.750 INCHES NOMINAL IN, first_arm_length: 1.500 INCHES MINIMUM IN, style_designator: STRAIGHT CORRUGATED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-359-9031, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M09
NSN: 5340-00-359-9031
FSC: 5340
CAGE: 89564 — VULCAN-HART CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC COVER
wall_thickness0.125 INCHES NOMINAL IN
working_length6.125 INCHES NOMINAL IN
inside_diameter1.750 INCHES NOMINAL IN
first_arm_length1.500 INCHES MINIMUM IN
special_featuresHOSE SHALL WITHSTAND A -40 DEG TEMPERATURE AND BE RESISTANT TO HEAT,CHEMICALS,OIL,WET ROT,OR ANY TYPE OF ANTI-FREEZE,RUST INHIBITORS,OR LIQUIDS USED IN ENGINE COOLANT SYSTEMS
style_designatorSTRAIGHT CORRUGATED
second_arm_length2.000 INCHES MAXIMUM IN
NSN5340-00-359-9031
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M09 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: IRON
•
SUPPORTED ITEM AND QUANTITY: 1 TUBE
•
PIPE ACCOMMODATION DIAMETER: 0.840 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALIRON
SUPPORTED ITEM AND QUANTITY1 TUBE
PIPE ACCOMMODATION DIAMETER0.840 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
168.11Upgraded Successor
successor cross-reference
successor
16811Upgraded Successor
successor cross-reference
successor
6515NCM115820Upgraded Successor
successor cross-reference
successor
05.001.140Upgraded Successor
successor cross-reference
successor
2D200BInterchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M09?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M09?
M09 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace M09?
There are 14 known substitutes for M09: 168.11, 16811, 6515NCM115820 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M09?
M09 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-359-9031. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M09

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026