PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 264G122
264G122 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.375 INCHES NOMINAL IN, outside_diameter: 2.627 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 2.623 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-983-9494, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
264G122
NSN: 5330-00-983-9494
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.375 INCHES NOMINAL IN
outside_diameter2.627 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.623 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.688 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-983-9494
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 264G122 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 2.623 INCHES NOMINAL IN
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
•
SURFACE TREATMENT: PLASTIC CASE
•
MATERIAL: LEATHER SEALING ELEMENT
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER2.623 INCHES NOMINAL IN
SEAL WIDTH0.375 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
SURFACE TREATMENTPLASTIC CASE
MATERIALLEATHER SEALING ELEMENT
MATERIALSTEEL CASE
OUTSIDE DIAMETER2.627 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.688 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
2247-414DInterchangeable
interchangeable cross-reference
interchangeable
JV5042Interchangeable
interchangeable cross-reference
interchangeable
168-11Interchangeable
interchangeable cross-reference
interchangeable
2D200BInterchangeable
interchangeable cross-reference
interchangeable
6163097-1Interchangeable
interchangeable cross-reference
interchangeable
168.11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 264G122?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 264G122?
264G122 is a SEAL,PLAIN ENCASED.
What parts can replace 264G122?
There are 9 known substitutes for 264G122: 2247-414D, JV5042, 168-11 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 264G122?
264G122 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-983-9494. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 264G122

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026