PartsTable
Technical Data Sheet
Download PDF

LH12392-4 — NUT,SELF-LOCKING,TEN POINT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

LH12392-4: NUT,SELF-LOCKING,TEN POINT.

The NUT,SELF-LOCKING,TEN POINT is a the manufacturer industrial component. Key specifications include special_features: FORM, FIT, FUNCTION CRITICAL, end_item_identification: JET ENGINE MODEL F404, criticality_code_justification: FEAT. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-130-2789, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LH12392-4
NSN: 5310-01-130-2789
FSC: 5310 — Nuts and Washers
CAGE: 019L2 — ESNA, LLC (USA)
SPECIFICATIONS
special_featuresFORM, FIT, FUNCTION CRITICAL
end_item_identificationJET ENGINE MODEL F404
criticality_code_justificationFEAT
general_characteristics_item_descriptionCRES,AMS 5735,0.420 IN. MIN,0.440 IN. MAX DIA,0.312 IN. ACROSS THE FLATS,0.307 IN. MIN,0.322 IN. MAX 4,0.250-28 UNJF-3B INTERNAL THD,TEN DRIVE POINTS IN
NSN5310-01-130-2789
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: LH12392-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: CRES,AMS 5735,0.420 IN. MIN,0.440 IN. MAX DIA,0.312 IN. ACROSS THE FLATS,0.307 IN. MIN,0.322 IN. MAX 4,0.250-28 UNJF-3B INTERNAL THD,TEN DRIVE POINTS IN
•
CRITICALITY CODE JUSTIFICATION: FEAT
TECHNICAL CHARACTERISTICS
GENERAL CHARACTERISTICS ITEM DESCRIPTIONCRES,AMS 5735,0.420 IN. MIN,0.440 IN. MAX DIA,0.312 IN. ACROSS THE FLATS,0.307 IN. MIN,0.322 IN. MAX 4,0.250-28 UNJF-3B INTERNAL THD,TEN DRIVE POINTS IN
CRITICALITY CODE JUSTIFICATIONFEAT
SPECIAL FEATURESFORM, FIT, FUNCTION CRITICAL
END ITEM IDENTIFICATIONJET ENGINE MODEL F404
SUBSTITUTES & CROSS-REFERENCES 6
J1092P04AReference document
Same NSN cross-reference
Reference document — Secondary reference
10159703Reference document
Same NSN cross-reference
Reference document — Informative reference only
BH01816-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5310PL2178759Reference document
Same NSN cross-reference
Reference document — Informative reference only
J1092P04Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
J1092P04DReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy LH12392-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LH12392-4?
LH12392-4 is a NUT,SELF-LOCKING,TEN POINT.
What parts can replace LH12392-4?
There are 6 known substitutes for LH12392-4: J1092P04A, 10159703, BH01816-4 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for LH12392-4?
LH12392-4 is cataloged in the U.S. Government catalog under NSN 5310-01-130-2789. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LH12392-4