PartsTable
Technical Data Sheet
Download PDF

BH01816-4 — NUT,SELF-LOCKING,TEN POINT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

BH01816-4: NUT,SELF-LOCKING,TEN POINT.

The NUT,SELF-LOCKING,TEN POINT is a the manufacturer industrial component. Key specifications include special_features: FORM, FIT, FUNCTION CRITICAL, end_item_identification: JET ENGINE MODEL F404, criticality_code_justification: FEAT. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-130-2789, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BH01816-4
NSN: 5310-01-130-2789
FSC: 5310 — Nuts and Washers
CAGE: 27238 — BRISTOL INDUSTRIES, LLC (USA)
SPECIFICATIONS
special_featuresFORM, FIT, FUNCTION CRITICAL
end_item_identificationJET ENGINE MODEL F404
criticality_code_justificationFEAT
general_characteristics_item_descriptionCRES,AMS 5735,0.420 IN. MIN,0.440 IN. MAX DIA,0.312 IN. ACROSS THE FLATS,0.307 IN. MIN,0.322 IN. MAX 4,0.250-28 UNJF-3B INTERNAL THD,TEN DRIVE POINTS IN
NSN5310-01-130-2789
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: BH01816-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: CRES,AMS 5735,0.420 IN. MIN,0.440 IN. MAX DIA,0.312 IN. ACROSS THE FLATS,0.307 IN. MIN,0.322 IN. MAX 4,0.250-28 UNJF-3B INTERNAL THD,TEN DRIVE POINTS IN
•
CRITICALITY CODE JUSTIFICATION: FEAT
TECHNICAL CHARACTERISTICS
GENERAL CHARACTERISTICS ITEM DESCRIPTIONCRES,AMS 5735,0.420 IN. MIN,0.440 IN. MAX DIA,0.312 IN. ACROSS THE FLATS,0.307 IN. MIN,0.322 IN. MAX 4,0.250-28 UNJF-3B INTERNAL THD,TEN DRIVE POINTS IN
CRITICALITY CODE JUSTIFICATIONFEAT
SPECIAL FEATURESFORM, FIT, FUNCTION CRITICAL
END ITEM IDENTIFICATIONJET ENGINE MODEL F404
SUBSTITUTES & CROSS-REFERENCES 6
LH12392-4Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
J1092P04AReference document
Same NSN cross-reference
Reference document — Secondary reference
10159703Reference document
Same NSN cross-reference
Reference document — Informative reference only
5310PL2178759Reference document
Same NSN cross-reference
Reference document — Informative reference only
J1092P04Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
J1092P04DReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy BH01816-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BH01816-4?
BH01816-4 is a NUT,SELF-LOCKING,TEN POINT.
What parts can replace BH01816-4?
There are 6 known substitutes for BH01816-4: LH12392-4, J1092P04A, 10159703 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BH01816-4?
BH01816-4 is cataloged in the U.S. Government catalog under NSN 5310-01-130-2789. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BH01816-4