PartsTable
Technical Data Sheet
PartsTable / COMPONENT / L6307
L6307 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, overall_width: 31.0 MILLIMETERS NOMINAL MM, alignment_type: SELF-ALIGNING, load_direction: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-078-2903, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L6307
NSN: 5340-00-078-2903
FSC: 5340
CAGE: 46717 — PETTIBONE LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter35.00 MILLIMETERS NOMINAL MM
overall_width31.0 MILLIMETERS NOMINAL MM
alignment_typeSELF-ALIGNING
load_directionANGULAR
surface_finishGROUND
special_featuresSTEEL MATERIAL,PAINTED OD;6.875 IN. O/A LG,0.875 IN. WIDTH AT MTG FACILITY,FURNISHED W/TWO SPRING PINS AND A THD BALL ON OTHER END IN
style_designatorNON-SEPARABLE
end_item_identificationTRUCK,LIFT,FORK,MODEL 600 GTC
self-alignment_locationINTERNAL
overall_outside_diameter80.00 MILLIMETERS NOMINAL MM
NSN5340-00-078-2903
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: L6307 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONTRUCK,LIFT,FORK,MODEL 600 GTC
SPECIAL FEATURESSTEEL MATERIAL,PAINTED OD;6.875 IN. O/A LG,0.875 IN. WIDTH AT MTG FACILITY,FURNISHED W/TWO SPRING PINS AND A THD BALL ON OTHER END IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
W2VHM500X39PC205Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171/14Interchangeable
interchangeable cross-reference
interchangeable
2307JInterchangeable
interchangeable cross-reference
interchangeable
568-L6307Interchangeable
Same NIIN cross-reference
interchangeable
A67086Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy L6307?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L6307?
L6307 is a BEARING,BALL,ANNULAR.
What parts can replace L6307?
There are 5 known substitutes for L6307: W2VHM500X39PC205, FF-B-171/14, 2307J and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for L6307?
L6307 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-078-2903. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L6307

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026