PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2307J
2307J ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, overall_width: 31.0 MILLIMETERS NOMINAL MM, alignment_type: SELF-ALIGNING, load_direction: ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-6148, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2307J
NSN: 3110-00-554-6148
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter35.00 MILLIMETERS NOMINAL MM
overall_width31.0 MILLIMETERS NOMINAL MM
alignment_typeSELF-ALIGNING
load_directionANGULAR
surface_finishGROUND
style_designatorNON-SEPARABLE
self-alignment_locationINTERNAL
overall_outside_diameter80.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
NSN3110-00-554-6148
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2307J · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 35.00 MILLIMETERS NOMINAL MM
•
SELF-ALIGNMENT LOCATION: INTERNAL
•
RETAINER FABRICATION METHOD: PRESSED
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-SEPARABLE
MATERIALSTEEL OVERALL
SURFACE FINISHGROUND
OVERALL WIDTH31.0 MILLIMETERS NOMINAL MM
BORE DIAMETER35.00 MILLIMETERS NOMINAL MM
SELF-ALIGNMENT LOCATIONINTERNAL
RETAINER FABRICATION METHODPRESSED
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
ALIGNMENT TYPESELF-ALIGNING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
568-L6307Interchangeable
interchangeable cross-reference
interchangeable
L6307Interchangeable
interchangeable cross-reference
interchangeable
A67086Interchangeable
interchangeable cross-reference
interchangeable
2312Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171/14-J12C2CInterchangeable
interchangeable cross-reference
interchangeable
2B8252Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2307J?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2307J?
2307J is a BEARING,BALL,ANNULAR.
What parts can replace 2307J?
There are 18 known substitutes for 2307J: 568-L6307, L6307, A67086 and 15 more. Substitute compatibility should be verified for your specific system.
Is 2307J still available?
2307J is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2307J

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026