PartsTable
Technical Data Sheet
PartsTable / O-RING / L30444
L30444 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, center_hole_diameter: 2.290 INCHES MINIMUM AND 2.310 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-441-9928, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L30444
NSN: 5331-00-441-9928
FSC: 5331 — O-RING
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialRUBBER
center_hole_diameter2.290 INCHES MINIMUM AND 2.310 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-441-9928
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: L30444 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.290 INCHES MINIMUM AND 2.310 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.290 INCHES MINIMUM AND 2.310 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
104X14.1AInterchangeable
interchangeable cross-reference
interchangeable
0048-9060N674-70Interchangeable
interchangeable cross-reference
interchangeable
4165593Interchangeable
interchangeable cross-reference
interchangeable
104X141AInterchangeable
Same NIIN cross-reference
interchangeable
47738-41Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy L30444?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L30444?
L30444 is a O-RING.
What parts can replace L30444?
There are 5 known substitutes for L30444: 104X14.1A, 0048-9060N674-70, 4165593 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for L30444?
L30444 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-441-9928. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L30444

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026