PartsTable
Technical Data Sheet
PartsTable / O-RING / 0048-9060N674-70
0048-9060N674-70 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, center_hole_diameter: 0.025 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN, cross-sectional_height: 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-451-1593, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0048-9060N674-70
NSN: 5331-00-451-1593
FSC: 5331 — O-RING
CAGE: 08752 — PARKER-HANNIFIN CORP FLUIDPOWER GROUP MOBILE HYDRAULICS DIV (USA)
SPECIFICATIONS
materialRUBBER
center_hole_diameter0.025 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN
cross-sectional_height0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
NSN5331-00-451-1593
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0048-9060N674-70 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER
•
CROSS-SECTIONAL HEIGHT: 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.025 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER
CROSS-SECTIONAL HEIGHT0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.025 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
L30444Interchangeable
interchangeable cross-reference
interchangeable
104X141AInterchangeable
interchangeable cross-reference
interchangeable
47738-41Interchangeable
interchangeable cross-reference
interchangeable
159859Interchangeable
interchangeable cross-reference
interchangeable
142614-0001Interchangeable
interchangeable cross-reference
interchangeable
5T353Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0048-9060N674-70?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0048-9060N674-70?
0048-9060N674-70 is a O-RING.
What parts can replace 0048-9060N674-70?
There are 9 known substitutes for 0048-9060N674-70: L30444, 104X141A, 47738-41 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0048-9060N674-70?
0048-9060N674-70 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-451-1593. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0048-9060N674-70

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026