PartsTable
Technical Data Sheet
Download PDF

L16816 — CUP,TAPERED ROLLER BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

L16816: CUP,TAPERED ROLLER BEARING.

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: RUBBER SYNTHETIC TUBE, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, overall_width: 0.6250 INCHES NOMINAL IN, exterior_color: BLACK, inside_diameter: 0.625 INCHES NOMINAL IN, outside_diameter: 1.031 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-0302, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
L16816
NSN: 3110-00-100-0302
NIINs: 001000302, 010608841
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 46717 — PETTIBONE LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC TUBE
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
overall_width0.6250 INCHES NOMINAL IN
exterior_colorBLACK
inside_diameter0.625 INCHES NOMINAL IN
outside_diameter1.031 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN
style_designatorNORMAL ANGLE
operating_pressure875.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure3500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
backface_corner_radius0.0312 INCHES NOMINAL IN
inside_surface_conditionSMOOTH
media_for_which_designedHYDRAULIC FLUID AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE
NSN3110-00-100-0302
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: L16816 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
OUTSIDE DIAMETER: 3.8125 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0312 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
OVERALL WIDTH0.6250 INCHES NOMINAL IN
OUTSIDE DIAMETER3.8125 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0312 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 8
10A7292Reference document
Same NSN cross-reference
Reference document — Secondary reference
45733Reference document
Same NSN cross-reference
Reference document — Secondary reference
P2749Reference document
Same NSN cross-reference
Reference document — Secondary reference
7H4566Reference document
Same NSN cross-reference
Reference document — Secondary reference
382AReference document
Same NSN cross-reference
Reference document — Secondary reference
95-0457Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy L16816?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is L16816?
L16816 is a CUP,TAPERED ROLLER BEARING.
What parts can replace L16816?
There are 8 known substitutes for L16816: 10A7292, 45733, P2749 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for L16816?
L16816 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0302. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — L16816