JM44LC13WH8R — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

JM44LC13WH8R: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 321 OR STEEL COMP 347 BAND, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, special_features: CUSHION COLOR NATURAL, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-202-7024, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JM44LC13WH8R

NSN: 5340-01-202-7024
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)

SPECIFICATIONS

diameter	0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	STEEL COMP 321 OR STEEL COMP 347 BAND
overall_width	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_features	CUSHION COLOR NATURAL
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
loop_inside_diameter	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
specification/standard_data	81205-BACC10GE MANUFACTURERS SPECIFICATION
material_document_and_classification	AMS5510 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5512 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.872 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.654 INCHES NOMINAL IN
NSN	5340-01-202-7024

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS5510 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5512 ASSN STD SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.872 INCHES NOMINAL IN

•

SPECIFICATION/STANDARD DATA: 81205-BACC10GE MANUFACTURERS SPECIFICATION

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5510 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5512 ASSN STD SINGLE MATERIAL RESPONSE BAND
MATERIAL DOCUMENT AND CLASSIFICATION	D6-54312-1,FSCM 81205 MFR REF SINGLE MATERIAL RESPONSE CUSHION
DIAMETER	0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.872 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA	81205-BACC10GE MANUFACTURERS SPECIFICATION
SPECIAL FEATURES	CUSHION COLOR NATURAL
TONGUE HOLE TYPE	ROUND, UNTHREADED

SUBSTITUTES & CROSS-REFERENCES 3

509SS8Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

TA12C32WH8Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

BACC10GE8CSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy JM44LC13WH8R?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JM44LC13WH8R?

JM44LC13WH8R is a CLAMP,LOOP.

What parts can replace JM44LC13WH8R?

There are 3 known substitutes for JM44LC13WH8R: 509SS8, TA12C32WH8, BACC10GE8C. Substitute compatibility should be verified for your specific system.

What is the NSN for JM44LC13WH8R?

JM44LC13WH8R is cataloged in the U.S. Government catalog under NSN 5340-01-202-7024. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JM44LC13WH8R — CLAMP,LOOP

Request a Quote — JM44LC13WH8R