The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 321 OR STEEL COMP 347 BAND, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, special_features: CUSHION COLOR NATURAL, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-074-2091, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
BACC10GE8C
NSN:5340-00-074-2091 NIINs:000742091, 012027024, 016694687 FSC:5340 — Hardware, Commercial CAGE:81220 — NATIONAL STEEL AND SHIPBUILDING COMPANY (USA)
SPECIFICATIONS
diameter
0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material
STEEL COMP 321 OR STEEL COMP 347 BAND
overall_width
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_features
CUSHION COLOR NATURAL
style_designator
OFFSET MOUNT
tongue_hole_type
ROUND, UNTHREADED
material_thickness
0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
loop_inside_diameter
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
end_item_identification
KC-46 AIRCRAFT
specification/standard_data
81205-BACC10GE MANUFACTURERS SPECIFICATION
material_document_and_classification
AMS5510 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5512 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end
0.872 INCHES NOMINAL IN
NSN
5340-00-074-2091
COMPONENT DIAGRAM
KEY FEATURES
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.872 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.654 INCHES NOMINAL IN
•
MATERIAL: GLASS FIBER CUSHION
TECHNICAL CHARACTERISTICS
STYLE DESIGNATOR
OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION
AISI ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER
0.204 INCHES NOMINAL IN
OVERALL WIDTH
0.500 INCHES NOMINAL IN
MATERIAL THICKNESS
0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END
0.872 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACC10GE8C?
BACC10GE8C is a CLAMP,LOOP.
What parts can replace BACC10GE8C?
There is 1 known substitute for BACC10GE8C: 400WSS8. Substitute compatibility should be verified for your specific system.
What is the NSN for BACC10GE8C?
BACC10GE8C is cataloged in the U.S. Government catalog under NSN 5340-00-074-2091. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.