JM44LC13WH22 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

JM44LC13WH22: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 321 OR STEEL COMP 347 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-368-2045, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JM44LC13WH22

NSN: 5340-01-368-2045
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)

SPECIFICATIONS

diameter	0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	STEEL COMP 321 OR STEEL COMP 347 BAND
overall_width	0.500 INCHES NOMINAL IN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
loop_inside_diameter	1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end	1.310 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	1.092 INCHES NOMINAL IN
NSN	5340-01-368-2045

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

DIAMETER: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.310 INCHES NOMINAL IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.092 INCHES NOMINAL IN

•

MATERIAL: STEEL COMP 321 OR STEEL COMP 347 BAND

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
DIAMETER	0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.310 INCHES NOMINAL IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	1.092 INCHES NOMINAL IN
MATERIAL	STEEL COMP 321 OR STEEL COMP 347 BAND
MATERIAL	RUBBER SILICONE CLASS Q CUSHION
LOOP INSIDE DIAMETER	1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 3

JM44LC13WH22RReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

S369WSSH22Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

BACC10GE22CSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy JM44LC13WH22?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JM44LC13WH22?

JM44LC13WH22 is a CLAMP,LOOP.

What parts can replace JM44LC13WH22?

There are 3 known substitutes for JM44LC13WH22: JM44LC13WH22R, S369WSSH22, BACC10GE22C. Substitute compatibility should be verified for your specific system.

What is the NSN for JM44LC13WH22?

JM44LC13WH22 is cataloged in the U.S. Government catalog under NSN 5340-01-368-2045. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JM44LC13WH22 — CLAMP,LOOP

Request a Quote — JM44LC13WH22