PartsTable
Technical Data Sheet
Download PDF

S369WSSH22 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S369WSSH22: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: RUBBER SILICONE CLASS Q CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-368-2045, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S369WSSH22
NSN: 5340-01-368-2045
FSC: 5340 — Hardware, Commercial
CAGE: 18076 — UMPCO, INC. DBA UMPCO INC (USA)
SPECIFICATIONS
diameter0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialRUBBER SILICONE CLASS Q CUSHION
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
loop_inside_diameter1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end1.310 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.092 INCHES NOMINAL IN
NSN5340-01-368-2045
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S369WSSH22 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DIAMETER: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.310 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.092 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 321 OR STEEL COMP 347 BAND
TECHNICAL CHARACTERISTICS
STYLE DESIGNATOROFFSET MOUNT
DIAMETER0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.310 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.092 INCHES NOMINAL IN
MATERIALSTEEL COMP 321 OR STEEL COMP 347 BAND
MATERIALRUBBER SILICONE CLASS Q CUSHION
LOOP INSIDE DIAMETER1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
JM44LC13WH22RReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
BACC10GE22CSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy S369WSSH22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S369WSSH22?
S369WSSH22 is a CLAMP,LOOP.
What parts can replace S369WSSH22?
There are 2 known substitutes for S369WSSH22: JM44LC13WH22R, BACC10GE22C. Substitute compatibility should be verified for your specific system.
What is the NSN for S369WSSH22?
S369WSSH22 is cataloged in the U.S. Government catalog under NSN 5340-01-368-2045. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S369WSSH22

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.