The RELAY,ELECTROMAGNETIC is a the manufacturer industrial component. Key specifications include duty_type: CONTINUOUS, time_delay: 0.05 SECONDS NOMINAL FIXED RELEASE TIME, overall_width: 0.505 INCHES MINIMUM AND 0.525 INCHES MAXIMUM IN, overall_height: 1.105 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN, overall_length: 1.698 INCHES MINIMUM AND 1.718 INCHES MAXIMUM IN, special_features: 1.0 PERCENT PER 10,000 CYCLES FAILURE RATE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5945-01-308-2060, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| duty_type | CONTINUOUS |
| time_delay | 0.05 SECONDS NOMINAL FIXED RELEASE TIME |
| coil_quantity | 1 |
| overall_width | 0.505 INCHES MINIMUM AND 0.525 INCHES MAXIMUM IN |
| overall_height | 1.105 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN |
| overall_length | 1.698 INCHES MINIMUM AND 1.718 INCHES MAXIMUM IN |
| special_features | 1.0 PERCENT PER 10,000 CYCLES FAILURE RATE |
| winding_quantity | 1 |
| mounting_slot_width | 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN |
| mounting_facility_pattern | IN-LINE SINGLE MOUNTING FACILITY |
| terminal_type_and_quantity | 8 PIN ALL FUNCTIONS |
| specification/standard_data | 81349-MIL-R-83536/11 GOVERNMENT SPECIFICATION |
| NSN | 5945-01-308-2060 |
| TERMINAL TYPE AND QUANTITY | 8 PIN ALL FUNCTIONS |
| TEST DATA DOCUMENT | 81349-MIL-R-83536 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 4.0 AMPERES AC AND 4.0 AMPERES DC MOTOR LOAD |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.396 INCHES MINIMUM AND 1.446 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 SLOTTED HOLE SINGLE MOUNTING FACILITY |
| DUTY TYPE | CONTINUOUS |
| TIME DELAY | 0.02 SECONDS NOMINAL FIXED OPERATE TIME |
| WINDING QUANTITY | 1 |
| OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP | 115.0 VOLTS AC 25 DEG CELSIUS SINGLE WINDING |
| MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 8.0 AMPERES AC AND 8.0 AMPERES DC INDUCTIVE LOAD |