PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS27401-36U
MS27401-36U ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RELAY,ELECTROMAGNETIC is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, duty_type: CONTINUOUS, time_delay: 0.02 SECONDS NOMINAL FIXED OPERATE TIME, storage_type: GENERAL PURPOSE WAREHOUSE, cubic_measure: 1.294 CUBIC INCHES, overall_width: 0.505 INCHES MINIMUM AND 0.525 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-058-3719, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS27401-36U
NSN: 5315-01-058-3719
FSC: 5315
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
duty_typeCONTINUOUS
time_delay0.02 SECONDS NOMINAL FIXED OPERATE TIME
storage_typeGENERAL PURPOSE WAREHOUSE
coil_quantity1
cubic_measure1.294 CUBIC INCHES
overall_width0.505 INCHES MINIMUM AND 0.525 INCHES MAXIMUM IN
overall_height1.105 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
overall_length1.698 INCHES MINIMUM AND 1.718 INCHES MAXIMUM IN
first_end_stylePOINTED
fragility_factorMODERATELY RUGGED
special_features1.0 PERCENT PER 10,000 CYCLES FAILURE RATE
NSN5315-01-058-3719
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS27401-36U · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END STYLE: POINTED
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END STYLEPOINTED
MATERIALSTEEL OVERALL
SPECIAL FEATURES0.310 IN. LG,0.063 IN. DIA IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
09450-950Interchangeable
interchangeable cross-reference
interchangeable
2-1124Interchangeable
interchangeable cross-reference
interchangeable
04404-034Interchangeable
interchangeable cross-reference
interchangeable
70239195Interchangeable
interchangeable cross-reference
interchangeable
74994910Interchangeable
interchangeable cross-reference
interchangeable
MS9105-04Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS27401-36U?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS27401-36U?
MS27401-36U is a RELAY,ELECTROMAGNETIC.
What parts can replace MS27401-36U?
There are 15 known substitutes for MS27401-36U: 09450-950, 2-1124, 04404-034 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS27401-36U?
MS27401-36U is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-058-3719. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS27401-36U

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026