PartsTable
Technical Data Sheet
Download PDF

J534 9030B4C — ADAPTER,STRAIGHT,TUBE TO BOSS

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

J534 9030B4C: ADAPTER,STRAIGHT,TUBE TO BOSS.

The ADAPTER,STRAIGHT,TUBE TO BOSS is a the manufacturer industrial component. Key specifications include height: 12.7 MILLIMETERS MINIMUM AND 14.7 MILLIMETERS MAXIMUM MM, material: STEEL BODY, shank_length: 3.8 MILLIMETERS MINIMUM AND 5.4 MILLIMETERS MAXIMUM MM, style_designator: STRAIGHT, width_across_flats: 7.94 MILLIMETERS NOMINAL MM, nominal_thread_size: 0.25 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-719-0324, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J534 9030B4C
NSN: 4730-01-719-0324
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
height12.7 MILLIMETERS MINIMUM AND 14.7 MILLIMETERS MAXIMUM MM
materialSTEEL BODY
shank_length3.8 MILLIMETERS MINIMUM AND 5.4 MILLIMETERS MAXIMUM MM
style_designatorSTRAIGHT
width_across_flats7.94 MILLIMETERS NOMINAL MM
nominal_thread_size0.25 INCHES IN
end_item_identification2320016545245
thread_quantity_per_inch28
NSN4730-01-719-0324
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: J534 9030B4C · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 7.94 MILLIMETERS NOMINAL MM
•
SHANK LENGTH: 3.8 MILLIMETERS MINIMUM AND 5.4 MILLIMETERS MAXIMUM MM
•
STYLE DESIGNATOR: STRAIGHT
•
NOMINAL THREAD SIZE: 0.25 INCHES IN
•
HEIGHT: 12.7 MILLIMETERS MINIMUM AND 14.7 MILLIMETERS MAXIMUM MM
•
THREAD QUANTITY PER INCH: 28
•
MATERIAL: STEEL BODY
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS7.94 MILLIMETERS NOMINAL MM
SHANK LENGTH3.8 MILLIMETERS MINIMUM AND 5.4 MILLIMETERS MAXIMUM MM
STYLE DESIGNATORSTRAIGHT
NOMINAL THREAD SIZE0.25 INCHES IN
HEIGHT12.7 MILLIMETERS MINIMUM AND 14.7 MILLIMETERS MAXIMUM MM
END ITEM IDENTIFICATION2320016545245
THREAD QUANTITY PER INCH28
MATERIALSTEEL BODY
SUBSTITUTES & CROSS-REFERENCES 1
J534Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy J534 9030B4C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J534 9030B4C?
J534 9030B4C is a ADAPTER,STRAIGHT,TUBE TO BOSS.
What parts can replace J534 9030B4C?
There is 1 known substitute for J534 9030B4C: J534. Substitute compatibility should be verified for your specific system.
What is the NSN for J534 9030B4C?
J534 9030B4C is cataloged in the U.S. Government catalog under NSN 4730-01-719-0324. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J534 9030B4C