PartsTable
Technical Data Sheet
Download PDF

J534 — ADAPTER,STRAIGHT,TUBE TO BOSS

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

J534: ADAPTER,STRAIGHT,TUBE TO BOSS.

The ADAPTER,STRAIGHT,TUBE TO BOSS is a the manufacturer industrial component. Key specifications include angle: 45.0 DEGREES, height: 12.7 MILLIMETERS MINIMUM AND 14.7 MILLIMETERS MAXIMUM MM, material: STEEL BODY, seat_angle: 37.0 RADIANS FIRST END, shank_length: 3.8 MILLIMETERS MINIMUM AND 5.4 MILLIMETERS MAXIMUM MM, thread_class: 3A ALL ENDS A. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-278-4216, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J534
NSN: 4730-00-278-4216
NIINs: 002784216, 002784814, 002937913, 004943015, 010359451, 010370239, 011254458, 011890526, 011890530, 012333701, 014914699, 014977067, 015127985, 015207814, 017190324
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
angle45.0 DEGREES
height12.7 MILLIMETERS MINIMUM AND 14.7 MILLIMETERS MAXIMUM MM
materialSTEEL BODY
seat_angle37.0 RADIANS FIRST END
shank_length3.8 MILLIMETERS MINIMUM AND 5.4 MILLIMETERS MAXIMUM MM
thread_class3A ALL ENDS A
connection_typeTHREADED EXTERNAL TUBE FIRST END
connection_styleFLARED (TUBE) FIRST END
special_featuresAZF ENGINE, AIRCRAFT, J-57 ALL MODELS (C-135, EC-135, B-5
style_designatorSTRAIGHT
surface_treatmentZINC OVERALL
width_across_flats7.94 MILLIMETERS NOMINAL MM
NSN4730-00-278-4216
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: J534 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD SIZE: 0.125 INCHES IN
•
SPECIFICATION/STANDARD DATA: 81343-J534 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
NONDEFINITIVE SPEC/STD DATA: 7B FIGURE
•
ANGLE: 45.0 DEGREES
•
SCREW THREAD SERIES DESIGNATOR: NPT
•
SURFACE TREATMENT: CADMIUM AND ZINC OVERALL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
NOMINAL THREAD SIZE0.125 INCHES IN
SPECIFICATION/STANDARD DATA81343-J534 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NONDEFINITIVE SPEC/STD DATA7B FIGURE
ANGLE45.0 DEGREES
SPECIAL FEATURESBOTH ENDS PLAIN/STRAIGHT WITH INTERNAL THREADS; NOMINAL PIPE SIZE ACCOMMODATES 0.125 IN BOTH ENDS; LEG LENGTHS ARE NOMINAL 0.250 AND 0.500 IN
SCREW THREAD SERIES DESIGNATORNPT
SURFACE TREATMENTCADMIUM AND ZINC OVERALL
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
43716Reference document
Same NSN cross-reference
Reference document — Secondary reference
4730002784216Reference document
Same NSN cross-reference
Reference document — Informative reference only
SAE J534 FIG 7BReference document
Same NSN cross-reference
Reference document — Secondary reference
0914464-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
914464Reference document
Same NSN cross-reference
Reference document — Secondary reference
190801Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy J534?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J534?
J534 is a ADAPTER,STRAIGHT,TUBE TO BOSS.
What parts can replace J534?
There are 7 known substitutes for J534: 43716, 4730002784216, SAE J534 FIG 7B and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J534?
J534 is cataloged in the U.S. Government catalog under NSN 4730-00-278-4216. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J534