PartsTable
Technical Data Sheet
Download PDF

J515CH295Z0234H — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

J515CH295Z0234H: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE NITRILE, temp_rating: -30.0 CELSIUS AND 125.0 CELSIUS DEGC, outside_diameter: 2.87 MILLIMETERS MINIMUM AND 3.03 MILLIMETERS MAXIMUM MM, peripheral_diameter: 23.24 MILLIMETERS MINIMUM AND 23.70 MILLIMETERS MAXIMUM MM, end_item_identification: 2350-01-575-0951. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-666-7885, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J515CH295Z0234H
NSN: 5331-01-666-7885
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE NITRILE
temp_rating-30.0 CELSIUS AND 125.0 CELSIUS DEGC
outside_diameter2.87 MILLIMETERS MINIMUM AND 3.03 MILLIMETERS MAXIMUM MM
peripheral_diameter23.24 MILLIMETERS MINIMUM AND 23.70 MILLIMETERS MAXIMUM MM
end_item_identification2350-01-575-0951
NSN5331-01-666-7885
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: J515CH295Z0234H MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -30.0 CELSIUS AND 125.0 CELSIUS DEGC
•
OUTSIDE DIAMETER: 2.87 MILLIMETERS MINIMUM AND 3.03 MILLIMETERS MAXIMUM MM
•
PERIPHERAL DIAMETER: 23.24 MILLIMETERS MINIMUM AND 23.70 MILLIMETERS MAXIMUM MM
•
MATERIAL: RUBBER BUTADIENE NITRILE
TECHNICAL CHARACTERISTICS
TEMP RATING-30.0 CELSIUS AND 125.0 CELSIUS DEGC
OUTSIDE DIAMETER2.87 MILLIMETERS MINIMUM AND 3.03 MILLIMETERS MAXIMUM MM
PERIPHERAL DIAMETER23.24 MILLIMETERS MINIMUM AND 23.70 MILLIMETERS MAXIMUM MM
END ITEM IDENTIFICATION2350-01-575-0951
MATERIALRUBBER BUTADIENE NITRILE
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
SAE-J515Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy J515CH295Z0234H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J515CH295Z0234H?
J515CH295Z0234H is a O-RING.
What parts can replace J515CH295Z0234H?
There is 1 known substitute for J515CH295Z0234H: SAE-J515. Substitute compatibility should be verified for your specific system.
What is the NSN for J515CH295Z0234H?
J515CH295Z0234H is cataloged in the U.S. Government catalog under NSN 5331-01-666-7885. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J515CH295Z0234H