PartsTable
Technical Data Sheet
Download PDF

SAE-J515 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SAE-J515: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: PLASTIC ACRYLONITRILE, temp_rating: -30.0 CELSIUS AND 125.0 CELSIUS DEGC, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 30.26 INCHES NOMINAL IN, special_features: TEMPERATURE RANGE OF -30 DEGREE CELSIUS TO 125 DEGREE CELSIUS FOR PETROLEUM-BASED FLUIDS, peripheral_diameter: 23.24 MILLIMETERS MINIMUM AND 23.70 MILLIMETERS MAXIMUM MM. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-387-9490, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE-J515
NSN: 5331-01-387-9490
NIINs: 013879490, 014530743, 014653634, 014925678, 014970980, 015077470, 015159350, 015642757, 015642764, 015642767, 015642773, 015642776, 015642784, 015642787, 015642800, 015642805, 015648729, 015809402, 016068503, 016068540, 016068544, 016090754, 016250698, 016250699, 016250702, 016609198, 016619132, 016620798, 016620800, 016639953, 016667885, 016730210, 016816516, 016816742, 016816875, 016822301, 016873449, 016947301
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialPLASTIC ACRYLONITRILE
temp_rating-30.0 CELSIUS AND 125.0 CELSIUS DEGC
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter30.26 INCHES NOMINAL IN
special_featuresTEMPERATURE RANGE OF -30 DEGREE CELSIUS TO 125 DEGREE CELSIUS FOR PETROLEUM-BASED FLUIDS
peripheral_diameter23.24 MILLIMETERS MINIMUM AND 23.70 MILLIMETERS MAXIMUM MM
center_hole_diameter29.74 INCHES NOMINAL IN
elongation_percentage100 MINIMUM
cross-sectional_height0.26 INCHES NOMINAL IN
end_item_identification2350-01-575-0951;2350-01-577-0830
specification/standard_data81343-SAE J515 NATIONAL STD/SPEC
material_document_and_classificationASTM D2000 AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SINGLE MATERIAL RESPONSE OR SAE J200 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE
NSN5331-01-387-9490
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SAE-J515 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
•
HARDNESS RATING: 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J2000 4CH915B14E015E035 ASSN STD SINGLE MATERIAL RESPONSE
•
CENTER HOLE DIAMETER: 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
HARDNESS RATING85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONSAE J2000 4CH915B14E015E035 ASSN STD SINGLE MATERIAL RESPONSE
CENTER HOLE DIAMETER0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
J515-4-1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy SAE-J515?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE-J515?
SAE-J515 is a O-RING.
What parts can replace SAE-J515?
There is 1 known substitute for SAE-J515: J515-4-1. Substitute compatibility should be verified for your specific system.
What is the NSN for SAE-J515?
SAE-J515 is cataloged in the U.S. Government catalog under NSN 5331-01-387-9490. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE-J515

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.