PartsTable
Technical Data Sheet
Download PDF

J514 6 080109S — PLUG,TUBE FITTING,THREADED

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

J514 6 080109S: PLUG,TUBE FITTING,THREADED.

The PLUG,TUBE FITTING,THREADED is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, seat_angle: 12.0 DEGREES, head_height: 0.250 INCHES NOMINAL IN, thread_class: 2A EXTERNAL A, overall_length: 0.750 INCHES NOMINAL IN, connection_style: FLARELESS. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-752-9174, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J514 6 080109S
NSN: 4730-00-752-9174
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
seat_angle12.0 DEGREES
head_height0.250 INCHES NOMINAL IN
thread_class2A EXTERNAL A
overall_length0.750 INCHES NOMINAL IN
connection_styleFLARELESS
style_designatorPLUG, TUBE FITTING FLARELESS (NOTE: DRILLED HOLE IS OPTIONAL, SHOULD NOT BE CONSIDERED AS A SEPARATING CHARACTERISTIC)
thread_directionRIGHT-HAND EXTERNAL
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.562 INCHES EXTERNAL IN
thread_series_designatorUNF EXTERNAL
nondefinitive_spec/std_data20D FIGURE
NSN4730-00-752-9174
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: J514 6 080109S · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.250 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35,TYPE2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CONNECTION STYLE: FLARELESS
•
STYLE DESIGNATOR: PLUG, TUBE FITTING FLARELESS (NOTE: DRILLED HOLE IS OPTIONAL, SHOULD NOT BE CONSIDERED AS A SEPARATING CHARACTERISTIC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66,AISI/SAE 301 THROUGH 395,STYLL C43 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND EXTERNAL
•
NOMINAL THREAD SIZE: 0.562 INCHES EXTERNAL IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.250 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35,TYPE2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
CONNECTION STYLEFLARELESS
STYLE DESIGNATORPLUG, TUBE FITTING FLARELESS (NOTE: DRILLED HOLE IS OPTIONAL, SHOULD NOT BE CONSIDERED AS A SEPARATING CHARACTERISTIC)
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66,AISI/SAE 301 THROUGH 395,STYLL C43 FED STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH0.750 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND EXTERNAL
NOMINAL THREAD SIZE0.562 INCHES EXTERNAL IN
SEAT ANGLE12.0 DEGREES
SPECIFICATION/STANDARD DATA96906-MS51891 GOVERNMENT STANDARD AND 81343-J514 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SUBSTITUTES & CROSS-REFERENCES 8
SAE-J514-2Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
6PNU-SSSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SAE-J514Reference document
Same NSN cross-reference
Reference document — Secondary reference
J514Reference document
Same NSN cross-reference
Reference document — Secondary reference
6PNU-SReference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-F-18866Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy J514 6 080109S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J514 6 080109S?
J514 6 080109S is a PLUG,TUBE FITTING,THREADED.
What parts can replace J514 6 080109S?
There are 8 known substitutes for J514 6 080109S: SAE-J514-2, 6PNU-SS, SAE-J514 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J514 6 080109S?
J514 6 080109S is cataloged in the U.S. Government catalog under NSN 4730-00-752-9174. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J514 6 080109S

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.