PartsTable
Technical Data Sheet
PartsTable / COMPONENT / J4896P
J4896P ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RING,BEARING,OUTER is a the manufacturer industrial component. Key specifications include overall_width: 1.0000 INCHES NOMINAL IN, surface_finish: GROUND, largest_bore_diameter: 1.3750 INCHES NOMINAL IN, overall_outside_diameter: 1.4375 INCHES NOMINAL IN, standard_tolerance_designation: RBEC NO.1. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-8504, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J4896P
NSN: 3110-00-151-8504
FSC: 3110
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
overall_width1.0000 INCHES NOMINAL IN
surface_finishGROUND
largest_bore_diameter1.3750 INCHES NOMINAL IN
overall_outside_diameter1.4375 INCHES NOMINAL IN
standard_tolerance_designationRBEC NO.1
NSN3110-00-151-8504
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: J4896P · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LARGEST BORE DIAMETER: 1.3750 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
•
OVERALL OUTSIDE DIAMETER: 1.4375 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
LARGEST BORE DIAMETER1.3750 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
OVERALL OUTSIDE DIAMETER1.4375 INCHES NOMINAL IN
OVERALL WIDTH1.0000 INCHES NOMINAL IN
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
100-1Interchangeable
interchangeable cross-reference
interchangeable
15202Interchangeable
interchangeable cross-reference
interchangeable
4102Interchangeable
interchangeable cross-reference
interchangeable
68-2842Interchangeable
interchangeable cross-reference
interchangeable
20A11521-102-11Interchangeable
interchangeable cross-reference
interchangeable
0-110Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy J4896P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J4896P?
J4896P is a RING,BEARING,OUTER.
What parts can replace J4896P?
There are 16 known substitutes for J4896P: 100-1, 15202, 4102 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J4896P?
J4896P is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-8504. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J4896P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026