PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0-110
0-110 ✓ Verified by PartsTable
Plustek · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,VARIABLE,CERAMIC DIELE. Key specifications include width: 1.250 INCHES NOMINAL IN, length: 1.500 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR AND RUBBER NATURAL AND RUBBER SYNTHETIC OVERALL, unit_type: HEX, bonnet_type: INSIDE SCREW, temp_rating: -40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-005-8184, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0-110
NSN: 5330-00-005-8184
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width1.250 INCHES NOMINAL IN
length1.500 INCHES NOMINAL IN
materialRUBBER CHLOROPRENE CLASS CR AND RUBBER NATURAL AND RUBBER SYNTHETIC OVERALL
unit_typeHEX
bonnet_typeINSIDE SCREW
temp_rating-40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
nominal_width0.250 INCHES IN
overall_width0.500 INCHES NOMINAL IN
outside_length11.000 INCHES NOMINAL IN
overall_height0.375 INCHES NOMINAL IN
overall_length5.500 INCHES NOMINAL IN
connection_typeTHREADED INTERNAL PIPE ALL ENDS
NSN5330-00-005-8184
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0-110 MFR: Plustek ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 0.561 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
CENTER HOLE DIAMETER: 0.355 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83248 TY 2,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER0.561 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN
TEMP RATING-40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
CENTER HOLE DIAMETER0.355 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83248 TY 2,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
0110Interchangeable
interchangeable cross-reference
interchangeable
79-1/4Interchangeable
interchangeable cross-reference
interchangeable
1B415-114Interchangeable
interchangeable cross-reference
interchangeable
136-126Interchangeable
interchangeable cross-reference
interchangeable
9626Interchangeable
interchangeable cross-reference
interchangeable
1442Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0-110?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0-110?
0-110 is a CAPACITOR,VARIABLE,CERAMIC DIELE manufactured by Plustek.
What parts can replace 0-110?
There are 15 known substitutes for 0-110: 0110, 79-1/4, 1B415-114 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0-110?
0-110 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-005-8184. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0-110

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026