J1508 TYPE SLF SIZE 12 — CLAMP,HOSE

✓ Government record, cited

— · HOSE FITTING

PRODUCT OVERVIEW

J1508 TYPE SLF SIZE 12: CLAMP,HOSE.

The CLAMP,HOSE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, overall_width: 0.495 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN, inside_diameter: 0.69 INCHES MINIMUM AND 1.25 INCHES MAXIMUM IN, special_features: INCORPORATES STACK OF CONICAL SPRING WASHERS;, style_designator: WIRE, material_thickness: 0.022 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-696-4550, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

J1508 TYPE SLF SIZE 12

NSN: 4730-01-696-4550
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	STEEL CORROSION RESISTING OVERALL
overall_width	0.495 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN
inside_diameter	0.69 INCHES MINIMUM AND 1.25 INCHES MAXIMUM IN
special_features	INCORPORATES STACK OF CONICAL SPRING WASHERS;
style_designator	WIRE
material_thickness	0.022 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
fastening_device_type	SCREW
end_item_identification	6115-016718118
nondefinitive_spec/std_data	21 FIGURE
specification/standard_data	0U583-SAE J1508 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN	4730-01-696-4550

COMPONENT DIAGRAM

KEY FEATURES

•

FASTENING DEVICE TYPE: SCREW

•

STYLE DESIGNATOR: WIRE

•

MATERIAL THICKNESS: 0.022 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN

•

SPECIFICATION/STANDARD DATA: 0U583-SAE J1508 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

•

NONDEFINITIVE SPEC/STD DATA: 21 FIGURE

•

INSIDE DIAMETER: 0.69 INCHES MINIMUM AND 1.25 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

FASTENING DEVICE TYPE	SCREW
STYLE DESIGNATOR	WIRE
OVERALL WIDTH	0.495 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.022 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA	0U583-SAE J1508 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NONDEFINITIVE SPEC/STD DATA	21 FIGURE
INSIDE DIAMETER	0.69 INCHES MINIMUM AND 1.25 INCHES MAXIMUM IN
SPECIAL FEATURES	INCORPORATES STACK OF CONICAL SPRING WASHERS;
END ITEM IDENTIFICATION	6115-016718118
MATERIAL	STEEL CORROSION RESISTING OVERALL

OTHER ITEMS IN FSC 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

4730-00-000-1895 4730-00-000-4289 4730-00-000-4445 4730-00-000-8373 4730-00-000-8897 4730-00-001-0007 4730-00-001-0008

SUBSTITUTES & CROSS-REFERENCES 2

J1508Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-J1508Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy J1508 TYPE SLF SIZE 12?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is J1508 TYPE SLF SIZE 12?

J1508 TYPE SLF SIZE 12 is a CLAMP,HOSE.

What parts can replace J1508 TYPE SLF SIZE 12?

There are 2 known substitutes for J1508 TYPE SLF SIZE 12: J1508, SAE-J1508. Substitute compatibility should be verified for your specific system.

What is the NSN for J1508 TYPE SLF SIZE 12?

J1508 TYPE SLF SIZE 12 is cataloged in the U.S. Government catalog under NSN 4730-01-696-4550. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

J1508 TYPE SLF SIZE 12 — CLAMP,HOSE

Request a Quote — J1508 TYPE SLF SIZE 12