PartsTable
Technical Data Sheet
Download PDF

J1508 — PACK AND HARNESS ASSEMBLY,PARACH

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

J1508: PACK AND HARNESS ASSEMBLY,PARACH.

PACK AND HARNESS ASSEMBLY,PARACH. Key specifications include material: STEEL CORROSION RESISTING OVERALL, overall_width: 0.88 INCHES NOMINAL IN, inside_diameter: 190.5 MILLIMETERS MINIMUM AND 198.4 MILLIMETERS MAXIMUM MM, special_features: INCORPORATES STACK OF CONICAL SPRING WASHERS;, style_designator: ADJUSTABLE BAND, surface_treatment: CHROMATE ZINC AND OXIDE AND PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-071-7890, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J1508
NSN: 4730-00-071-7890
NIINs: 000717890, 002198407, 002302959, 002891686, 003634102, 003936688, 005295257, 008162787, 009083194, 009086293, 009227889, 009656520, 010056335, 011098001, 011950374, 012416594, 012969318, 013743695, 014445231, 014574172, 014585103, 014620749, 014627663, 014646853, 014646856, 014656329, 014734735, 014828701, 014921024, 014964878, 015047853, 015067564, 015302997, 015324505, 015325268, 015370901, 015391491, 015452594, 015561792, 015567148, 015567153, 015634967, 015961298, 015966649, 016231463, 016645862, 016953171, 016953176, 016964550, 017361361
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
overall_width0.88 INCHES NOMINAL IN
inside_diameter190.5 MILLIMETERS MINIMUM AND 198.4 MILLIMETERS MAXIMUM MM
special_featuresINCORPORATES STACK OF CONICAL SPRING WASHERS;
style_designatorADJUSTABLE BAND
surface_treatmentCHROMATE ZINC AND OXIDE AND PASSIVATE OVERALL
component_quantity5
material_thickness0.065 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
loop_inside_diameter31.75 MILLIMETERS MINIMUM AND 53.98 MILLIMETERS MAXIMUM MM
fastening_device_typeSCREW
end_item_identificationMK54 MOD 0 COLD GAS
nondefinitive_spec/std_data21 FIGURE
NSN4730-00-071-7890
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: J1508 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENING DEVICE TYPE: SPRING TENSION
•
STYLE DESIGNATOR: WIRE
•
SPECIFICATION/STANDARD DATA: 81348-WW-C-440 GOVERNMENT SPECIFICATION AND 96906-MS39326 GOVERNMENT STANDARD
•
NONDEFINITIVE SPEC/STD DATA: E TYPE AND 1A TABLE A
•
INSIDE DIAMETER: 1.100 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC OVERALL
•
MATERIAL: STEEL COMP 1080 OVERALL
TECHNICAL CHARACTERISTICS
FASTENING DEVICE TYPESPRING TENSION
STYLE DESIGNATORWIRE
OVERALL WIDTH0.375 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA81348-WW-C-440 GOVERNMENT SPECIFICATION AND 96906-MS39326 GOVERNMENT STANDARD
NONDEFINITIVE SPEC/STD DATAE TYPE AND 1A TABLE A
INSIDE DIAMETER1.100 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN
SURFACE TREATMENTZINC OVERALL
MATERIALSTEEL COMP 1080 OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
A18Reference document
Same NSN cross-reference
Reference document — Secondary reference
J1508, TYPE E, SIZE-18Reference document
Same NSN cross-reference
Reference document — Secondary reference
5342PL0820650Reference document
Same NSN cross-reference
Reference document — Informative reference only
WW-C-440Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS39326-18Reference document
Same NSN cross-reference
Reference document — Secondary reference
A-A-52506Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy J1508?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J1508?
J1508 is a PACK AND HARNESS ASSEMBLY,PARACH.
What parts can replace J1508?
There are 7 known substitutes for J1508: A18, J1508, TYPE E, SIZE-18, 5342PL0820650 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J1508?
J1508 is cataloged in the U.S. Government catalog under NSN 4730-00-071-7890. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J1508

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.