PartsTable
Technical Data Sheet
PartsTable / COMPONENT / J1220G16
J1220G16 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.198 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING OVERALL, overall_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, special_features: CUSHION INCLUDED, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-531-6982, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J1220G16
NSN: 5340-00-531-6982
FSC: 5340
CAGE: 98500 — AGC ACQUISITION LLC DIV AGC ACQUISITON LLC (USA)
SPECIFICATIONS
diameter0.198 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialSTEEL CORROSION RESISTING OVERALL
overall_width0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
special_featuresCUSHION INCLUDED
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
features_providedLOCKWIRE HOLE
material_thickness0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
loop_inside_diameter1.100 INCHES NOMINAL IN
specification/standard_data26512-GC500B MANUFACTURERS SPECIFICATION
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
cushioning_environmental_protectionHEAT
NSN5340-00-531-6982
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: J1220G16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 321 BAND
•
MATERIAL THICKNESS: 0.052 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.204 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.000 INCHES NOMINAL IN
MATERIALSTEEL COMP 321 BAND
MATERIAL THICKNESS0.052 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
MATERIALASBESTOS AND PLASTIC POLYTETRAFLUOROETHYLENE CUSHION
DISTANCE FROM LOOP CENTER TO TONGUE END1.188 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
J1220G16Upgraded Successor
successor cross-reference
successor
5340PL0886136Upgraded Successor
successor cross-reference
successor
J1153G16Upgraded Successor
successor cross-reference
successor
B107.48Interchangeable
interchangeable cross-reference
interchangeable
B107.410Interchangeable
interchangeable cross-reference
interchangeable
75CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy J1220G16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J1220G16?
J1220G16 is a CLAMP,LOOP.
What parts can replace J1220G16?
There are 13 known substitutes for J1220G16: J1220G16, 5340PL0886136, J1153G16 and 10 more. Substitute compatibility should be verified for your specific system.
Is J1220G16 still available?
J1220G16 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J1220G16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026