Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.198 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING OVERALL, overall_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, special_features: CUSHION INCLUDED, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-118-6696, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
J1153G16
NSN:5340-01-118-6696 FSC:5340 CAGE:07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
diameter
0.198 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material
STEEL CORROSION RESISTING OVERALL
overall_width
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
special_features
CUSHION INCLUDED
style_designator
OFFSET MOUNT
tongue_hole_type
ROUND, UNTHREADED
features_provided
LOCKWIRE HOLE
material_thickness
0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
loop_inside_diameter
1.100 INCHES NOMINAL IN
environmental_attribute_code
ASBESTOS ALTERNATIVE PRODUCTS
cushioning_environmental_protection
HEAT
material_document_and_classification
AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN
5340-01-118-6696
COMPONENT DIAGRAM
KEY FEATURES
•
LOOP INSIDE DIAMETER: 1.100 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.144 INCHES MINIMUM AND 1.214 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.936 INCHES MINIMUM AND 0.986 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
STYLE DESIGNATOR: OFFSET MOUNT
•
FEATURES PROVIDED: LOCKWIRE HOLE
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURES
CUSHION INCLUDED
LOOP INSIDE DIAMETER
1.100 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END
1.144 INCHES MINIMUM AND 1.214 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
0.936 INCHES MINIMUM AND 0.986 INCHES MAXIMUM IN
MATERIAL
STEEL CORROSION RESISTING OVERALL
STYLE DESIGNATOR
OFFSET MOUNT
FEATURES PROVIDED
LOCKWIRE HOLE
CUSHIONING ENVIRONMENTAL PROTECTION
HEAT
MATERIAL DOCUMENT AND CLASSIFICATION
AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J1153G16?
J1153G16 is a CLAMP,LOOP.
What parts can replace J1153G16?
There are 4 known substitutes for J1153G16: ST1594-16, 00332, J1220G16 and 1 more. Substitute compatibility should be verified for your specific system.
Is J1153G16 still available?
J1153G16 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.