PartsTable
Technical Data Sheet
PartsTable / MRO / HX9
HX9 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The HX9 is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, alignment_type: RIGID, surface_finish: GROUND, standard_tolerance_designation: AFBMA STD TOLERANCE FOR THRUST BEARINGS, part_name_assigned_by_controlling_agency: SHELBY SLICE 900., thrust_directional_capability_designation: SINGLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-158-6606, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ HX9
NSN: 3110-00-158-6606
FSC: 3110
CAGE: 36384 — FMC CORP LINK-BELT DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
alignment_typeRIGID
surface_finishGROUND
special_featuresBAND AND APPLICATION-SPECIFIC RADIO FREQUENCY MODULES PROVIDE MICRO/MACRO-CELL SERVICE. SHELBY REPLACEMENT MODULE FREQUENCY RANGE 900. COMPONENT ITEMOF THE NEBULA SYSTEM, 5895-01-659-2602.
standard_tolerance_designationAFBMA STD TOLERANCE FOR THRUST BEARINGS
part_name_assigned_by_controlling_agencySHELBY SLICE 900.
thrust_directional_capability_designationSINGLE
NSN3110-00-158-6606
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: HX9 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
•
MATERIAL: STEEL OVERALL
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
MATERIALSTEEL OVERALL
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
17713Interchangeable
interchangeable cross-reference
interchangeable
HX9Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HX9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HX9?
HX9 is a HX9. It is classified as a MRO (MRO_GENERAL).
What parts can replace HX9?
There are 2 known substitutes for HX9: 17713, HX9. Substitute compatibility should be verified for your specific system.
What is the NSN for HX9?
HX9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-158-6606. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HX9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026