PartsTable
Technical Data Sheet
PartsTable / MRO / 17713
17713 ✓ Verified by PartsTable
Clementoni · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

InLine® S-VGA monitor cable with double shielding for video signal transmission. Constructed with 3 single-shielded coaxial lines (RGB) and 7 data lines this cable is fitted with 15-pin SVGA connectors with 1:1 connections (without PIN 9) while the blue colouring of the connectors, as per PC99 standard, ensures easy identification of the correct port to which the SVGA monitor cable should be connected. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-003-6783, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 17713
NSN: 5331-00-003-6783
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
end_item_identificationAIRCRAFT KC-46
part_name_assigned_by_controlling_agencyTYCHEN 4000 HOOD,SEALED SEAMS FOR T-LINK OR T200
NSN5331-00-003-6783
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17713 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 8.704 INCHES MINIMUM AND 8.764 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER8.704 INCHES MINIMUM AND 8.764 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
D-57621Interchangeable
interchangeable cross-reference
interchangeable
11269Interchangeable
interchangeable cross-reference
interchangeable
11269G1Interchangeable
interchangeable cross-reference
interchangeable
011126901Interchangeable
interchangeable cross-reference
interchangeable
R11269Interchangeable
interchangeable cross-reference
interchangeable
11713Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17713?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17713?
17713 is a 17713 manufactured by Clementoni. It is classified as a MRO (MRO_GENERAL).
What parts can replace 17713?
There are 14 known substitutes for 17713: D-57621, 11269, 11269G1 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 17713?
17713 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-003-6783. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17713

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026