PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HM0317
HM0317 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, head_height: 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.161 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN, hole_diameter: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, thread_length: 0.062 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-252-3061, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HM0317
NSN: 5305-01-252-3061
FSC: 5305
CAGE: 06351 — MICROWAVE ENGINEERING CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
head_height0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.161 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
hole_diameter0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
thread_length0.062 INCHES MAXIMUM IN
fastener_length0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
locking_featurePELLET THREADS
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
nominal_thread_diameter0.164 INCHES IN
thread_quantity_per_inch32
NSN5305-01-252-3061
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: HM0317 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD LENGTH: 0.062 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
HOLE DIAMETER: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD QUANTITY PER INCH: 32
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.062 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
HOLE DIAMETER0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
FASTENER LENGTH0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD QUANTITY PER INCH32
NOMINAL THREAD DIAMETER0.164 INCHES IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
LOCKING FEATUREPELLET THREADS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
A2096Interchangeable
interchangeable cross-reference
interchangeable
20088Interchangeable
interchangeable cross-reference
interchangeable
559H2-3538Interchangeable
interchangeable cross-reference
interchangeable
A01095Interchangeable
interchangeable cross-reference
interchangeable
2HC161Interchangeable
interchangeable cross-reference
interchangeable
573007Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HM0317?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HM0317?
HM0317 is a SCREW,CAP,SOCKET HEAD.
What parts can replace HM0317?
There are 8 known substitutes for HM0317: A2096, 20088, 559H2-3538 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HM0317?
HM0317 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-252-3061. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HM0317

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026