PartsTable
Technical Data Sheet
PartsTable / MRO / 20088
20088 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include width: 0.250 INCHES NOMINAL IN, material: NICKEL ALLOY 718 OVERALL, head_style: SPLINE EXTENDED WASHER, grip_length: 6.6775 INCHES MINIMUM AND 6.6975 INCHES MAXIMUM IN, head_height: 0.600 INCHES NOMINAL IN, thread_class: 3A A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-119-4732, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 20088
NSN: 5330-00-119-4732
FSC: 5330
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)
SPECIFICATIONS
width0.250 INCHES NOMINAL IN
materialNICKEL ALLOY 718 OVERALL
head_styleSPLINE EXTENDED WASHER
grip_length6.6775 INCHES MINIMUM AND 6.6975 INCHES MAXIMUM IN
head_height0.600 INCHES NOMINAL IN
thread_class3A A
grip_diameter0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM IN
thread_length1.3025 INCHES MINIMUM AND 1.3225 INCHES MAXIMUM IN
wheel_diameter7.000 INCHES NOMINAL IN
fastener_length8.000 INCHES NOMINAL IN
outside_diameter0.938 INCHES NOMINAL IN
special_featuresDRILLED HEAD, UNDRILLED SHANK
NSN5330-00-119-4732
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 20088 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 0.719 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: COPPER OVERALL
•
OUTSIDE DIAMETER: 0.938 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR METAL
•
CROSS-SECTIONAL THICKNESS: 0.094 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER0.719 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIALCOPPER OVERALL
OUTSIDE DIAMETER0.938 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR METAL
CROSS-SECTIONAL THICKNESS0.094 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
14563Interchangeable
interchangeable cross-reference
interchangeable
25450Interchangeable
interchangeable cross-reference
interchangeable
20088Interchangeable
interchangeable cross-reference
interchangeable
357-1765Interchangeable
interchangeable cross-reference
interchangeable
5L02159Interchangeable
interchangeable cross-reference
interchangeable
PLH20085M001PC58Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 20088?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20088?
20088 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 20088?
There are 17 known substitutes for 20088: 14563, 25450, 20088 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 20088?
20088 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-119-4732. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 20088

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026