PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HJ122012
HJ122012 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_diameter: 0.7500 INCHES NOMINAL IN, overall_width: 0.7500 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OIL HOLE AND OIL GROOVE IN OUTER RING. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-3236, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HJ122012
NSN: 3110-00-227-3236
FSC: 3110
CAGE: 60399 — REGAL-BELOIT CORPORATION DBA FASCO GROUP DIV CASSVILLE DIVISION (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_diameter0.7500 INCHES NOMINAL IN
overall_width0.7500 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOIL HOLE AND OIL GROOVE IN OUTER RING
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
overall_outside_diameter1.2500 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-227-3236
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: HJ122012 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL ROLLER
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
RETAINER FABRICATION METHOD: PRESSED
•
BORE DIAMETER: 0.7500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
MATERIALSTEEL ROLLER
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
RETAINER FABRICATION METHODPRESSED
SPECIAL FEATURESOIL HOLE AND OIL GROOVE IN OUTER RING
MATERIALCOPPER ALLOY OR STEEL RETAINER
BORE DIAMETER0.7500 INCHES NOMINAL IN
MATERIALSTEEL OUTER RING
OVERALL WIDTH0.7500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
60623P2027Interchangeable
interchangeable cross-reference
interchangeable
122012Interchangeable
interchangeable cross-reference
interchangeable
702002Interchangeable
interchangeable cross-reference
interchangeable
180230Interchangeable
interchangeable cross-reference
interchangeable
C600-045-1250Interchangeable
interchangeable cross-reference
interchangeable
845-2181282Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy HJ122012?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HJ122012?
HJ122012 is a BEARING,ROLLER,NEEDLE.
What parts can replace HJ122012?
There are 15 known substitutes for HJ122012: 60623P2027, 122012, 702002 and 12 more. Substitute compatibility should be verified for your specific system.
Is HJ122012 still available?
HJ122012 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HJ122012

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026