PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 702002
702002 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include special_features: METAL PUNCH, end_item_identification: PUMP, SELF-PRIM W/MTR, part_name_assigned_by_controlling_agency: PUMP, 1.5 THREAD NPT, SELF PRIMING, BRONZE WITH MOTOR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-4366, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
702002
NSN: 3110-00-120-4366
FSC: 3110
CAGE: 00000
SPECIFICATIONS
special_featuresMETAL PUNCH
end_item_identificationPUMP, SELF-PRIM W/MTR
part_name_assigned_by_controlling_agencyPUMP, 1.5 THREAD NPT, SELF PRIMING, BRONZE WITH MOTOR
NSN3110-00-120-4366
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 702002 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
BORE DIAMETER: 0.7500 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: OIL LUBRICATING
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
OVERALL OUTSIDE DIAMETER: 1.2500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
BORE DIAMETER0.7500 INCHES NOMINAL IN
LUBRICATION MATERIALOIL LUBRICATING
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OVERALL WIDTH0.7500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.2500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
7153Interchangeable
interchangeable cross-reference
interchangeable
M0-12-NInterchangeable
interchangeable cross-reference
interchangeable
180230Interchangeable
interchangeable cross-reference
interchangeable
A8241-403 / 823Interchangeable
interchangeable cross-reference
interchangeable
2140-0094Interchangeable
interchangeable cross-reference
interchangeable
OL-7153Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 702002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 702002?
702002 is a BEARING,ROLLER,NEEDLE.
What parts can replace 702002?
There are 23 known substitutes for 702002: 7153, M0-12-N, 180230 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 702002?
702002 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-4366. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 702002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026