PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HH-P-106
HH-P-106 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING MATERIAL is a the manufacturer industrial component. Key specifications include length: 324.000 INCHES NOMINAL IN, material: FLAX, joint_type: SCARF-PERIPHERAL OVERALL, special_features: GRAPHITE COATED, fabrication_method: BRAIDED, peripheral_diameter: 2.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-184-4185, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HH-P-106
NSN: 5330-00-184-4185
FSC: 5330
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
length324.000 INCHES NOMINAL IN
materialFLAX
joint_typeSCARF-PERIPHERAL OVERALL
special_featuresGRAPHITE COATED
fabrication_methodBRAIDED
peripheral_diameter2.750 INCHES NOMINAL IN
center_hole_diameter2.000 INCHES NOMINAL IN
lubrication_materialOIL
cross-sectional_width0.375 INCHES NOMINAL IN
cross-sectional_height0.375 INCHES NOMINAL IN
minimum_tensile_strength00 NON-MERCURY ALTERNATIVE - MEDICAL PRODUCTS - FEEDING TUBES
cross-sectional_shape_styleSQUARE
NSN5330-00-184-4185
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HH-P-106 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL WIDTH: 0.438 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-106, CLASS 1 FED SPEC SINGLE MATERIAL RESPONSE
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
CROSS-SECTIONAL HEIGHT: 0.438 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: TALLOW
•
MATERIAL: FLAX AND OIL LUBRICATING
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL WIDTH0.438 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-106, CLASS 1 FED SPEC SINGLE MATERIAL RESPONSE
CROSS-SECTIONAL SHAPE STYLESQUARE
CROSS-SECTIONAL HEIGHT0.438 INCHES NOMINAL IN
LUBRICATION MATERIALTALLOW
CROSS-SECTIONAL WIDTH0.438 INCHES NOMINAL IN
MATERIALFLAX AND OIL LUBRICATING
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-106, CLASS 1 FED SPEC SINGLE MATERIAL RESPONSE
LUBRICATION MATERIALTALLOW
MATERIALFLAX AND OIL LUBRICATING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
MIL-P-24752Interchangeable
interchangeable cross-reference
interchangeable
HHP00106Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-24752 CLASS 3, 5/16 RNDInterchangeable
interchangeable cross-reference
interchangeable
HH-P-106Interchangeable
interchangeable cross-reference
interchangeable
6305-2PC18Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-24377 1-1 /4 SQInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HH-P-106?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HH-P-106?
HH-P-106 is a PACKING MATERIAL.
What parts can replace HH-P-106?
There are 14 known substitutes for HH-P-106: MIL-P-24752, HHP00106, MIL-P-24752 CLASS 3, 5/16 RND and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HH-P-106?
HH-P-106 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-184-4185. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HH-P-106

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026