PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-P-24752 CLASS 3, 5/16 RND
MIL-P-24752 CLASS 3, 5/16 RND ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MIL-P-24752 CLASS 3, 5/16 RND is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-196-5057, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-P-24752 CLASS 3, 5/16 RND
NSN: 5330-00-196-5057
FSC: 5330
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberMIL-P-24752 CLASS 3, 5/16 RND
NSN5330-00-196-5057
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-P-24752 CLASS 3, 5/16 RND MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FABRICATION METHOD: BRAIDED
•
CROSS-SECTIONAL SHAPE STYLE: CIRCULAR
•
CROSS SECTION OUTSIDE DIAMETER: 0.312 INCHES NOMINAL IN
•
MATERIAL: FLAX AND HEMP
•
MINIMUM TENSILE STRENGTH: 00 NON-MERCURY ALTERNATIVE - MEDICAL PRODUCTS - FEEDING TUBES
TECHNICAL CHARACTERISTICS (FLIS)
FABRICATION METHODBRAIDED
CROSS-SECTIONAL SHAPE STYLECIRCULAR
CROSS SECTION OUTSIDE DIAMETER0.312 INCHES NOMINAL IN
CROSS SECTION OUTSIDE DIAMETER0.312 INCHES NOMINAL IN
MATERIALFLAX AND HEMP
MATERIALFLAX AND HEMP
MINIMUM TENSILE STRENGTH00 NON-MERCURY ALTERNATIVE - MEDICAL PRODUCTS - FEEDING TUBES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
HHP106Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-24752Interchangeable
interchangeable cross-reference
interchangeable
HHP00106Interchangeable
interchangeable cross-reference
interchangeable
6305-2PC18Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-24377 1-1 /4 SQInterchangeable
interchangeable cross-reference
interchangeable
2014 1 1-4 SQInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-P-24752 CLASS 3, 5/16 RND?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-P-24752 CLASS 3, 5/16 RND?
MIL-P-24752 CLASS 3, 5/16 RND is a MIL-P-24752 CLASS 3, 5/16 RND.
What parts can replace MIL-P-24752 CLASS 3, 5/16 RND?
There are 13 known substitutes for MIL-P-24752 CLASS 3, 5/16 RND: HHP106, MIL-P-24752, HHP00106 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-P-24752 CLASS 3, 5/16 RND?
MIL-P-24752 CLASS 3, 5/16 RND is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-196-5057. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-P-24752 CLASS 3, 5/16 RND

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026