PartsTable
Technical Data Sheet
PartsTable / O-RING / GS570EM025
GS570EM025 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -70.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 1.176 INCHES NOMINAL IN, elongation_percentage: 276 MAXIMUM, cross-sectional_height: 0.070 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-223-8395, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GS570EM025
NSN: 5331-01-223-8395
FSC: 5331 — O-RING
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-70.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
center_hole_diameter1.176 INCHES NOMINAL IN
elongation_percentage276 MAXIMUM
cross-sectional_height0.070 INCHES NOMINAL IN
material_document_and_classificationSR8019-65, CAGE 95272 MFR REF SINGLE MATERIAL RESPONSE
NSN5331-01-223-8395
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GS570EM025 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: SR8019-65, CAGE 95272 MFR REF SINGLE MATERIAL RESPONSE
•
CROSS-SECTIONAL HEIGHT: 0.070 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 276 MAXIMUM
•
TEMP RATING: -70.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER SYNTHETIC
•
CENTER HOLE DIAMETER: 1.176 INCHES NOMINAL IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONSR8019-65, CAGE 95272 MFR REF SINGLE MATERIAL RESPONSE
CROSS-SECTIONAL HEIGHT0.070 INCHES NOMINAL IN
ELONGATION PERCENTAGE276 MAXIMUM
TEMP RATING-70.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
MATERIALRUBBER SYNTHETIC
CENTER HOLE DIAMETER1.176 INCHES NOMINAL IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
1793-25Interchangeable
interchangeable cross-reference
interchangeable
10V60-141-025Interchangeable
interchangeable cross-reference
interchangeable
R1307P025Interchangeable
interchangeable cross-reference
interchangeable
025-C-69Interchangeable
Same NIIN cross-reference
interchangeable
A-025SR8019-65Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy GS570EM025?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GS570EM025?
GS570EM025 is a O-RING.
What parts can replace GS570EM025?
There are 5 known substitutes for GS570EM025: 1793-25, 10V60-141-025, R1307P025 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GS570EM025?
GS570EM025 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-223-8395. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GS570EM025

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026