PartsTable
Technical Data Sheet
PartsTable / O-RING / R1307P025
R1307P025 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 1.299 INCHES MINIMUM AND 1.333 INCHES MAXIMUM IN, center_hole_diameter: 1.170 INCHES MINIMUM AND 1.182 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-250-0239, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
R1307P025
NSN: 5331-00-250-0239
FSC: 5331 — O-RING
CAGE: 24446 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter1.299 INCHES MINIMUM AND 1.333 INCHES MAXIMUM IN
center_hole_diameter1.170 INCHES MINIMUM AND 1.182 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-250-0239
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: R1307P025 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.170 INCHES MINIMUM AND 1.182 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.299 INCHES MINIMUM AND 1.333 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.170 INCHES MINIMUM AND 1.182 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.299 INCHES MINIMUM AND 1.333 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
LM111H/883AInterchangeable
interchangeable cross-reference
interchangeable
115178-0008Interchangeable
interchangeable cross-reference
interchangeable
819079-0504GInterchangeable
interchangeable cross-reference
interchangeable
411-8797Interchangeable
interchangeable cross-reference
interchangeable
MS29513-25Interchangeable
interchangeable cross-reference
interchangeable
MS29513-25CPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy R1307P025?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R1307P025?
R1307P025 is a O-RING.
What parts can replace R1307P025?
There are 22 known substitutes for R1307P025: LM111H/883A, 115178-0008, 819079-0504G and 19 more. Substitute compatibility should be verified for your specific system.
Is R1307P025 still available?
R1307P025 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R1307P025

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026