PartsTable / O-RING / GS570EM012
GS570EM012
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, outside_diameter: 0.504 INCHES NOMINAL IN, center_hole_diameter: 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN, elongation_percentage: 200 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-248-3836, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
GS570EM012
NSN: 5331-00-248-3836 FSC: 5331 — O-RINGCAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR temp_rating -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF outside_diameter 0.504 INCHES NOMINAL IN center_hole_diameter 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN elongation_percentage 200 MAXIMUM cross-sectional_height 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN NSN 5331-00-248-3836
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: GS570EM012
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
• ELONGATION PERCENTAGE: 200 MAXIMUM
• TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
• OUTSIDE DIAMETER: 0.504 INCHES NOMINAL IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CENTER HOLE DIAMETER: 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN ELONGATION PERCENTAGE 200 MAXIMUM TEMP RATING -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF OUTSIDE DIAMETER 0.504 INCHES NOMINAL IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CENTER HOLE DIAMETER 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
9347 Interchangeable interchangeable cross-reference
interchangeable
CP45 Interchangeable interchangeable cross-reference
interchangeable
C155 Interchangeable interchangeable cross-reference
interchangeable
N09347 Interchangeable interchangeable cross-reference
interchangeable
3014507 Interchangeable interchangeable cross-reference
interchangeable
131-2 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy GS570EM012?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GS570EM012?
GS570EM012 is a O-RING.
What parts can replace GS570EM012?
There are 21 known substitutes for GS570EM012: 9347, CP45, C155 and 18 more. Substitute compatibility should be verified for your specific system.
Is GS570EM012 still available?
GS570EM012 is currently cancelled.
Request a Quote — GS570EM012