PartsTable
Technical Data Sheet
Download PDF

9347 — CABLE ASSEMBLY,SPECIAL PURPOSE,E

✓ Government record, cited
TERRA · MRO · MRO_GENERAL
PRODUCT OVERVIEW

9347: CABLE ASSEMBLY,SPECIAL PURPOSE,E.

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include end_item_identification: RECEIVER NAV-5 KIT. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-248-3836, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 9347
NSN: 5331-00-248-3836
NIINs: 002483836, 003604255, 003741693, 003770249, 005533010, 005967798, 010437227, 012857377, 014442599, 014543437, 015674047
FSC: 5331 — O-ring
CAGE: 45681 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV CORPORATE HEADQUARTERS (USA)
SPECIFICATIONS
end_item_identificationRECEIVER NAV-5 KIT
NSN5331-00-248-3836
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9347 MFR: TERRA ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.504 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 200 MAXIMUM
•
CENTER HOLE DIAMETER: 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.504 INCHES NOMINAL IN
ELONGATION PERCENTAGE200 MAXIMUM
CENTER HOLE DIAMETER0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 10
MS29513-012Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AS568-012MIL-P- 5315Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
725-70-012Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS29513-12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
012-C-69Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
10V60-141-012Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 9347?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9347?
9347 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E manufactured by TERRA. It is classified as a MRO (MRO_GENERAL).
What parts can replace 9347?
There are 10 known substitutes for 9347: MS29513-012, AS568-012MIL-P- 5315, 725-70-012 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9347?
9347 is cataloged in the U.S. Government catalog under NSN 5331-00-248-3836. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9347